6244 Pressurising Dehydrator Unit

150 litres of free air delivery per minute

Contact us
Cable Pressure Systems logo with a grey background
a small transparent pixel

The type 6244 is designed as a fully automatic pressurising dehydrator unit. Routine maintenance is minimised by the use of an automatically regenerated molecular sieve. Scheduled maintenance intervals are only required after 5000 hours of compressor run time, with a typical duty cycle of 5% – 10% this unit is capable of running for prolonged periods without intervention.

The standard unit is fitted with an air receiver tank in series with the dry air output, the pressure in this tank is sensed by the control electronics, closed loop control of the compressor ensures that this pressure is maintained at a preset level. This design feature ensures that the dry air output pressure remains stable over a range of load conditions, it also serves to minimise the compressor duty cycle.

COMPRESSOR Oil-less Air Compressor
POWER SUPPLY 415 Volts, 50 Hz, 2.2 KW, 10A
DRY AIR OUTPUT 150 litres free air delivery per minute
OUTPUT PRESSURE 0-15 psi adjustable through distribution panel
(available from Cable Pressure Systems).
DEWPOINT Better than -40 Degrees Celsius in ambient conditions
of +30 Degrees Celsius and 75% RH
WET DRY BYPASS Fail safe solenoid valve at dry air inlet to air receiver.
GAUGES Compressor Running Pressure
Air Receiver Pressure
Dewpoint Trend (Digital Readout)
ALARMS High Humidity
Low Receiver Pressure
Mains Fail
HUMIDITY CONTROL Digital Electronic Surveillance
AIR DRIER Twin bed, fully automatic heatless reactivation.
Desiccant – molecular sieve
RECEIVER 150 litre Air Receiver manufactured to BS EN 286
DIMENSIONS Height: 1215mm, Depth: 1600mm, Width: 850
PAINT FINISH STANDARD FINISH: EAU-DE-NIL BS381C TINT 216
Other colours available.
6244 Pressurising Dehydrator Unit

More Installations